Audio-technica AT4053b Hiperkardioidni kondenzatorski mikrofon
SKU: be6ad8761fe4
Načini plaćanja i dostava
Cene na našem sajtu variraju u odnosu na načine plaćanja. Cene na svakom proizvodu prikazane su na dva načina:
MPC – maloprodajna cena artikla
GOT – gotovinsko plaćanje (plaćanje gotovinom u maloprodaji, plaćanje karticom preko sajta odjednom, plaćanje pouzećem, plaćanje uplatnicom, plaćanje po predračunu)
Dostava je besplatna za online narudžbine fizičkih lica u vrednosti preko 15.000,00 dinara. Svaka pošiljka može biti osigurana dodatno/pošiljke do 70 000 dinara su osigurane.
Cenovnik dostave
Klikom na link posetićete stranicu sa ažuriranim cenovnikom kuriskih službi.
Opis proizvoda
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL).
- Specially engineered to meet the most critical acoustic requirements
of professional recording, broadcast and sound reinforcement - Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency
distortion and provides superior correlation of high-speed transients - Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure
compliance with Audio-Technica's stringent consistency and reliability
standards - RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Tehničke specifikacije proizvoda
- Element: Externally polarized (DC bias) capacitor
- Polar Pattern: Hypercardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll Off: 80 Hz,12 dB/octave
- Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Impedance: 50 ohms
- Maximum Input Sound Level: 145 dB SPL,1 kHz at 1% T.H.D.; 155 dB SPL,with 10 dB pad (nominal)
- Dynamic Range: 129 dB,1 kHz at Max SPL
- Signal to Noise Ratio: 78 dB,1 kHz at 1 Pa
- Phantom Power Requirements: 48V DC,4.8 mA typical
- Switch: Flat, roll-off; 10 dB pad (nominal)
- Weight: 127 g (4.5 oz)
- Dimensions: 155.0 mm (6.10") long,21.0 mm (0.83") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case